Chapter 82 - Tools, implements, cutlery, spoons and forks, of base metal; parts thereof, of base metal

HS Code 82034010

Perforating Punches and Pipe Cutters

Official tariff item: Perforating punches and pipe cutters

Current ICEGATE Duty Structure

Duty Component Rate
Basic Customs Duty (BCD) 10%
Agriculture Infrastructure and Development Cess (AIDC) 10%
Social Welfare Surcharge (SWS) 10% of BCD
Integrated GST (IGST) 18%

Source: ICEGATE Trade Guide on Imports. The table uses effective rates returned by ICEGATE where notification data is present. Actual payable duty can still depend on assessable value, preference claims, product-specific cesses, and shipment conditions.

Import Duty Calculator

Enter the assessable value (CIF value in rupees) to estimate the duty payable under HS 82034010 using the ICEGATE rates above.

This estimate applies the rates returned by the ICEGATE duty page, including effective notification rates and any listed safeguard rate represented above. It does not determine eligibility for preference claims, anti-dumping measures, or shipment-specific notification conditions.

Classification Note

Confirm the product's material, composition, function, and technical specifications against the complete ICEGATE tariff path before filing.

Common Customs Paperwork

  • Bill of Entry
  • Commercial Invoice
  • Packing List

These are the standard customs paperwork items, not a complete regulatory checklist for every product under this HS code.

Agency Checks To Verify

  • BIS STANDARD IS 4296 (PART 1): 2016[TOOLS FOR PRESSING PART 1 ROUND PUNCHES WITH 60 DEGREES CONICAL HEAD AND STRAIGHT SHANK]; BIS STANDARD IS 4296 (PART 2): 2015[TOOLS FOR PRESSING PART 2 PUNCHES WITH CYLINDRICAL HEAD AND STRAIGHT OR REDUCED SHANK] AND BIS STANDARD IS 4296 (PART 3): 2015[TOOLS FOR PRESSING PART 3 ROUND PUNCHES WITH 60 DEGREES CONICAL HEAD AND REDUCED SHANK] ARE APPLICABLE ON PRESS TOOL-PUNCHES. IT SHOULD BEAR STANDARD MARK UNDER A LICENSE AS PER SCHEME-I OF SCHEDULE-II OF BIS (CONFORMITY ASSESSMENT) REGULATIONS, 2018. REFER PRESS TOOL- PUNCHES (QUALITY CONTROL) ORDER, 2020 [SO 3994(E) DATED 04-11-2020]. ENSURE BIS COMPLIANCE FOR PRESS TOOL-PUNCHES.

Common Product Examples

Perforating Punches and Pipe Cutters

Other Codes in Chapter 82

82142010 Nail cutters (verify classification) Nail cutters under tariff item 82142010. Verify carefully because ICEGATE places this line under manicure or pedicure instruments. BCD 10% AIDC 10% IGST 18% 82011000 Spades and Shovels Official Indian tariff item 82011000 covers Spades and shovels. It falls under heading 8201 for HAND TOOLS, THE FOLLOWING SPADES, SHOVELS, MATTOCKS, PICKS, HOES, FORKS AND RAKES; AXES, BILL HOOKS AND SIMILAR HEWING TOOLS; SECATEURS AND PRUNERS OF ANY KIND; SCYTHES, SICKLES, HAY KNIVES, HEDGE SHEARS, TIMBER WEDGES AND OTHER TOOLS OF A KIND USED IN AGRICULTURE, HORTICULTURE OR FORESTRY.. BCD 10% AIDC 10% IGST 18% 82013000 Mattocks, Picks, Hoes and Rakes Official Indian tariff item 82013000 covers Mattocks, picks, hoes and rakes. It falls under heading 8201 for HAND TOOLS, THE FOLLOWING SPADES, SHOVELS, MATTOCKS, PICKS, HOES, FORKS AND RAKES; AXES, BILL HOOKS AND SIMILAR HEWING TOOLS; SECATEURS AND PRUNERS OF ANY KIND; SCYTHES, SICKLES, HAY KNIVES, HEDGE SHEARS, TIMBER WEDGES AND OTHER TOOLS OF A KIND USED IN AGRICULTURE, HORTICULTURE OR FORESTRY.. BCD 10% AIDC 10% IGST 18% 82014000 Axes, Bill Hooks and Similar Hewing Tools Official Indian tariff item 82014000 covers Axes, bill hooks and similar hewing tools. It falls under heading 8201 for HAND TOOLS, THE FOLLOWING SPADES, SHOVELS, MATTOCKS, PICKS, HOES, FORKS AND RAKES; AXES, BILL HOOKS AND SIMILAR HEWING TOOLS; SECATEURS AND PRUNERS OF ANY KIND; SCYTHES, SICKLES, HAY KNIVES, HEDGE SHEARS, TIMBER WEDGES AND OTHER TOOLS OF A KIND USED IN AGRICULTURE, HORTICULTURE OR FORESTRY.. BCD 10% AIDC 10% IGST 18% 82015000 Secateurs and Similar One-Handed Pruners and Shears (Including Poultry Shears) Official Indian tariff item 82015000 covers Secateurs and similar one-handed pruners and shears (including poultry shears). It falls under heading 8201 for HAND TOOLS, THE FOLLOWING SPADES, SHOVELS, MATTOCKS, PICKS, HOES, FORKS AND RAKES; AXES, BILL HOOKS AND SIMILAR HEWING TOOLS; SECATEURS AND PRUNERS OF ANY KIND; SCYTHES, SICKLES, HAY KNIVES, HEDGE SHEARS, TIMBER WEDGES AND OTHER TOOLS OF A KIND USED IN AGRICULTURE, HORTICULTURE OR FORESTRY.. BCD 10% AIDC 10% IGST 18% 82016000 Hedge Shears, Two-Handed Pruning Shears and Similar Two-Handed Shears Official Indian tariff item 82016000 covers Hedge shears, two-handed pruning shears and similar two-handed shears. It falls under heading 8201 for HAND TOOLS, THE FOLLOWING SPADES, SHOVELS, MATTOCKS, PICKS, HOES, FORKS AND RAKES; AXES, BILL HOOKS AND SIMILAR HEWING TOOLS; SECATEURS AND PRUNERS OF ANY KIND; SCYTHES, SICKLES, HAY KNIVES, HEDGE SHEARS, TIMBER WEDGES AND OTHER TOOLS OF A KIND USED IN AGRICULTURE, HORTICULTURE OR FORESTRY.. BCD 10% AIDC 10% IGST 18% 82019000 Other Hand Tools of A Kind Used In Agriculture, Horticulture or Forestry Official Indian tariff item 82019000 covers Other hand tools of a kind used in agriculture, horticulture or forestry. It falls under heading 8201 for HAND TOOLS, THE FOLLOWING SPADES, SHOVELS, MATTOCKS, PICKS, HOES, FORKS AND RAKES; AXES, BILL HOOKS AND SIMILAR HEWING TOOLS; SECATEURS AND PRUNERS OF ANY KIND; SCYTHES, SICKLES, HAY KNIVES, HEDGE SHEARS, TIMBER WEDGES AND OTHER TOOLS OF A KIND USED IN AGRICULTURE, HORTICULTURE OR FORESTRY.. BCD 10% AIDC 10% IGST 18% 82021010 Metal Working Hand Saws Official Indian tariff item 82021010 covers Metal working hand saws. It falls under heading 8202 for HAND SAWS; BLADES FOR SAWS OF ALL KINDS (INCLUDING SLITTING, SLOTTING OR TOOTHLESS SAW BLADES). BCD 10% AIDC 10% IGST 18% 82021020 Wood Working and Similar Hand Saws Official Indian tariff item 82021020 covers Wood working and similar hand saws. It falls under heading 8202 for HAND SAWS; BLADES FOR SAWS OF ALL KINDS (INCLUDING SLITTING, SLOTTING OR TOOTHLESS SAW BLADES). BCD 10% AIDC 10% IGST 18% 82021090 Hand Saws - Other Official Indian tariff item 82021090 covers Other. It falls under heading 8202 for HAND SAWS; BLADES FOR SAWS OF ALL KINDS (INCLUDING SLITTING, SLOTTING OR TOOTHLESS SAW BLADES). BCD 10% AIDC 10% IGST 18% 82022000 Band Saw Blades Official Indian tariff item 82022000 covers Band saw blades. It falls under heading 8202 for HAND SAWS; BLADES FOR SAWS OF ALL KINDS (INCLUDING SLITTING, SLOTTING OR TOOTHLESS SAW BLADES). BCD 10% AIDC 10% IGST 18% 82023100 With Working Part of Steel Official Indian tariff item 82023100 covers With working part of steel. It falls under heading 8202 for HAND SAWS; BLADES FOR SAWS OF ALL KINDS (INCLUDING SLITTING, SLOTTING OR TOOTHLESS SAW BLADES). BCD 10% AIDC 10% IGST 18%